Toko Multi Guna Packing

×
TokoMulti Guna Packing - Jual Tirai pvc dan Peralatan Garment
sql
Gasket Cutter valqua
Hover to Zoom

Last Updated
11 Apr 2020
Country Origin
Japan
Minimum Order
1 Pieces

Specification of

VALQUA No.CUTTERProduct nameGasket CutterFeatures▶ This is a set of convenient tools to easily cut out flange gaskets at a construction site or for assembly work.
▶ The supporting iron has scale marks, which allows easy and accurate size adjustments.
▶ By using a supporting iron (500L) which is sold separately, it is possible to cut out gaskets as large as 1,000 mm.
▶ It is highly recommended to keep this tool as an indispensable workshop tool not only in the maintenance department of a chemical plant, oil refinery or iron plant, but also in the assembly area of machine or equipment manufacturers as well as in pipe laying companies.Cutting rangeMinimum diameter : 50mm
Maximum diameter : 540mm
By using a supporting iron (500 L) which is sold separately, it is possible to cut out gaskets as large as 1,000 mm.Placing part ordersParts worn after long years of operation should be replaced with new parts. Orders for single items are also accepted when certain items are missing.
(For cutter blades ⑥, one replacement set consisting of five blades is available)Instructions for use1. First, insert the straight core needle ④ or the bending type core needle ⑤ at the bottom of the floating pole of the needle core ②, and fix it using the pressure bolt for the needle core ⑨. In this case, use the bending type core needle ⑤ if the cut diameter is up to 50 mm, and use the straight core needle ④ for a cut diameter larger than 50 mm.
2. Next, at the groove of the floating pole of the cutter blade ③, attach the blade ⑥ with two pressure bolts from the cutter blade ⑩.
3. Thread the supporting iron ① into the floating pole of the needle core ② and the floating pole for the cutter blade ③.
4. Set the part marked with "◁" of the floating pole of the needle core ② to zero to match the supporting iron ① as shown in Figure A, and firmly tighten with the knob.
5. Then, also shift the part marked with "◁" of the floating pole for cutter blade ③ to a desired position on the supporting iron ① determined by the radius of the gasket to be cut, and tighten firm with the knob.
6. Before cutting, place the material on a sheet of plywood board or a corrugated paper that is placed on a flat base or floor. Then, put the gasket cutter as shown in Figure B, hold the floating pole of the needle core with your left hand ②, and lightly dig in the straight core needle ④ or the bending type core needle ⑤. Now, lightly holding the floating pole for cutter blade ③ with your right hand, rotate it to cut forward while slightly pushing as if you were making a circle. Gasket Kit

Untuk keterangan lebih lanjut, silahkan download PDF ini :

Ulasan

/5
Ulasan
5
4
3
2
1

Foto dari Pembeli

Ulasan dari Pembeli

Filter
Semua
Dengan Foto
5
4
3
2
1
Telepon
Request a Quote
Produk Siap di Pesan
Rp 0
1
Bendera Indonesia Indonesia  |  Bendera Inggris English
Ingin menghubungi kami?
Klik tombol dibawah
Logo IDT
Chatbot