Specification of
KLINGER®top-graph 2000
Characteristic & main applications
The flexible graphite sealing material with a high degree of inherent stability.
It has high load bearing capacity combined with high seal ability.
It is ideally suited for use with steam and other critical applications.
Description
Material
Based on graphite and synthetic fibres. Manufactured using a process which provides the graphite gaskets with totally new, previously unachievable properties.
Technical Data – Typical values for 1.5mm thickness
Compressibility ASTM F 36 J 10%
Recovery ASTM F 36 J min. 60%
Stress relaxation DIN 52913
50 MPa, 16 h/300°C 32MPa
Klinger cold/hot compression 50 MPa
thickness decrease at 23°C 10%
thickness decrease at 300°C 10%
Tightness according DIN 3535/6 ml/min 0,5
Thickness increase ASTM F 146
water: 5 h/100°C 5%
fuel B: 5 h/23°C 7%
Density 1,75g/cm3
Meet the technical requirements of BS 7531:2006 Grade AX
Dimensions of the standard sheets
Sizes: 1,000 x 1,500 mm, 2,000 x 1,500 mm.
Thicknesses: 0.5 mm, 0.8mm,1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm, other thicknesses on request.
Tolerances: thickness ± 10%, length ± 50 mm, width ± 50 mm
Function and durability
The performance and life of KLINGER gaskets depend in large measure on proper storage and fitting, factors beyond the manufacture’s control. We can, however, vouch for the excellent quality of our products. With this in mind, please also observe our installation instructions Gasket Lembaran
